Index by Track

Civil, Infrastructure, and Construction
- 100: Grouping of unified indices in the optimization of cost readjustments of road works in Peru
- 105: Improvement of the Public Transport Route for Line 7103 in Lima: Reduction of Travel Time
- 110: Pedestrianization around the San José market determining the walkability index
- 119: Plastics Waste Management in Developing Country: The Case of Ecuador
- 214: Estimation of seismic behavior through static nonlinear analysis of an 8-story multifamily home, La Esperanza, Trujillo
- 229: Determination of the Physical and Mechanical Properties of Standardized Sand Mortar and Mortar with Crushed Brick Replacement
- 234: Application of the digital twin in the after-sales of multifamily homes to improve the quality dossier of technical common areas
- 252: Design of Varnish Based on Dairy Products for Masonry and Wood Walls
- 253: Electrical decarbonization technology as a replacement for equipment and appliances to reduce the burning of fossil fuels in civil buildings
- 254: Biomass modeling to optimize energy performance in sustainable multifamily buildings
- 262: Influence and Comparison of Slow, Fast and Controlled Breaking Asphalt Emulsion on the Mechanical Strength for Affirming Material
- 282: COMPRESSION STRENGTH AND WEIGHT OF CONCRETE F'C=210 KG/CM2AL REPLACING 7.5, 12.5 AND 22.5 % OF COARSE AGGREGATE WITH EXPANDED CLAY
- 283: MODIFICATION OF THE COMPRESSION STRENGTH OF A STRUCTURAL CONCRETE PLACED UNDER WATER WITH VARIOUS AMOUNTS OF ANTI-WASHOUT ADDITIVE
- 284: COMPRESSION STRENGTH OF CONCRETE WHEN USING SUPERPLASTIFYING ADDITIVE, IN LIGHTWEIGHT SLABS OF SELF-BUILT HOUSES IN THE CITY OF CAJAMARCA, PERU
- 296: Design and Implementation of Prototype Automated System for Collection, Storage and Monitoring of Some Physicochemical Characteristics of Rainwater at Home
- 319: Sociodemographic Factors and Their Influence on the Choice of Civil Engineering as a Career at a University in Cajamarca, 2023
- 322: Analysis of dynamic behavior due to wind loads in a 14-level structure with dual system, Trujillo
- 363: PHYSICAL-MECHANICAL PROPERTIES OF LIME AND SAND MORTARS WITH ADDITION OF BURNED CLAY POZZOLANA, FOR RESTORATION OF BUILDINGS CAJAMARCA, PERU
- 395: Influence of fiberglass and the additive chema estruct on the resistance of concrete f´c 280 kg/cm2, Trujillo 2023
- 396: Influence of abaca fiber and hydrated lime for the improvement of hot mix asphalt, Trujillo, Peru, 2023
- 457: Mechanical properties of concrete reinforced with 0.5% bamboo fiber, using the sclerometer and the compression resistance test
- 458: Influence of Andesitic Tuff Pozzolana on the Compressive Strength of a Mortar f´c=300kg/cm2
- 472: Compressive Strength of Foamed Concrete with a density of 55kg/m3 based on Sodium Lauryl Sulfate
- 488: Implementation of the use of artificial neural networks for the predictive calculation of concrete resistance, Trujillo
- 520: Effect of Deflocculant Type and Iron Oxide on the Color and Absorption of Engobed Ceramic
- 527: Compressive strength of a concrete f'c 210 Kg/cm2 made with ground glass fine aggregate and recycled iron
- 564: USE OF CARBON FIBERS AS CONCRETE REINFORCEMENT IN URBAN BUILDING PROJECTS
- 580: Properties of concrete f´c 210 kg/cm2 with the addition of fan-shell powder (Agropecten purpuratus)
- 585: The Influence of Recycling of Concrete Waste in Construction for the Preparation of Aggregates
- 594: Approaches to the analysis of accident risk on roads. A systematic review of the literature
- 639: How to evaluate the cyber risk of SMEs? An Academia strategy to create competitive advantages
- 657: Effect of a Non-Newtonian Fluid on the Axial Compressive Strength of Mortars
- 667: Influence of Bamboo (Guadua angustifolia) as a structural element in the construction of a two-story house compared to a masonry
- 686: Application of the On Demand system for vehicular decongestion of an avenue in an urban area with high trafficability
- 725: Sustainable Housing Design to Improve the Quality of Life of the Inhabitants of Zone “Z” Ate Huaycán 2023
- 731: Axial compressive strength of concrete f'c=210 and 280 kg/cm², when replacing aggregate with volcanic rock origin
- 737: Influence of spray curing on the compressive strength of concrete f'c=210 kg/cm²
- 751: Analysis of the Effects of the Addition of Sodium Bicarbonate in the Concrete
- 761: Use of Recycled Coarse Aggregate in Concrete f'c=210 kg/cm2 when Incorporating Percentages of Recycled Coarse Aggregate
- 769: Compressive Strength of Concrete with Additions of Barley Bran Ash and Sugarcane Bagasse
- 776: Compressive and Flexural Strength of Compacted Adobe with Used Motor and Cooking Oil (1%, 1.25%, and 1.50%), Cajamarca 2023.
- 784: Analysis of the Mechanical Properties of a Mortar Made with Type, ICo and Ms Cements
- 788: Influence of partial replacement of cement by ceramic powder and addition of steel fibers on the mechanical properties of concrete.
- 805: Physical and Mechanical Properties of Compacted Blocks Stabilized with Calcined Scallop Shell and Sugarcane Ash
- 846: Compression and Flexural Strength of Compacted Adobes with the Addition of Cement, Gypsum and Lime in 2.5%, 5% and 7.5%
- 853: Resistance to Compression and Flexion of Compacted Adobe with Addition of Aloe Vera Gel
- 932: Analysis of Slope Stability in Rock Masses Comparing the Limit Equilibrium Method and the Finite Element Method
- 990: Recovery of Cerium and Zeolite from Spent Fluidized Catalytic Cracking Catalyst
- 996: Compressive Strength of Concrete with Substitution of Fine Aggregate in 10%, 15% and 20% by Steel Slag
- 1072: High Resistance Bricks Elaborated with Cast Plastic and Sand, Cajamarca 2023
- 1081: Mechanical Properties of a Soil with the Addition of Pine Ash and Eucalyptus, Baños Del Inca - Cajamarca
- 1085: Acoustic solution to characterize a mechanical construction steel induced microstructural changes
- 1087: Assessing Radiological Risks and Natural Radioactivity in Building Materials from Ica, Peru
- 1102: Rainwater Improvement Through Treatment Through Granular Activated Carbon, Zeolite and Sand in the City of Cajamarca
- 1104: Admissible Capacity in Shallow Foundations with the Terzaghi, Meyerhof, Hansen and Vesic Equations by Triaxial Compression Test
- 1118: Influence of clay on the material from the Edgar, Guitarrero and Chonta quarries, according to the quality requirements for afirmados
- 1137: Sustainable Drainage: Paving stones with recycled PET (Polyethylene Terephthalate) in the city of Cajamarca
- 1143: Improvement of resistance to flexion and compression of concrete reinforced with steel fibers
- 1145: Construction of granular bases in the pavement structure with the use of recycled concrete aggregate
- 1154: Seismic assessment of affordable housing with walls made of PET bottles filled with fine aggregate in rural areas of Peru
- 1221: Evaluation of Accelerated Carbonation of High Strength Concrete with Anodic Manganese Dioxide Nanoparticles
- 1307: Evaluation of the Return Rate Between Ancón and Anconcito, Ecuador for the period 2020 and 2021
- 1310: Probabilistic evaluation of failure and reliability of the Huaripachi bridge structure using GPS technology and the Precise Point Positioning technique
- 1318: Comparative analysis of the physical-mechanical properties of eucalyptus, tornillo and moena wood for structural use in houses
- 1322: Use of natural light to achieve lighting comfort inside the house
- 1356: Comparative analysis of the durable performance of materials, reinforced concrete and ashlar.
- 1366: Influence of Slab Warping and Geometric Design on the International Roughness Index: A case study on the Oyon Ambo Road
- 1378: DISPLACEMENT AND THE FUNDAMENTAL FREQUENCY OF THE SUPERSTRUCTURE OF THE HUARIPACHI BRIDGE BY MEANS OF THE GLOBAL POSITIONING SYSTEM TECHNIQUE
- 1424: ANALYSIS OF SAW DUST FOR THE STABILIZATION OF SUGROUNDS ON ROAD TRACKS
- 1448: Compressive Strength of Compacted Adobes with Added Sugarcane Bagasse Ash at 5%, 10% and 15%
- 1471: Analysis of cellular concrete as a replacement for the granular base.
- 1496: Proposal for a hydrodynamic casing as a defense system in bridge pillars against local erosión
- 1513: Optimizing Compressive Strength in Rammed Earth Walls: Correlating Cement Dosage Effects
- 1627: Physical and mechanical behavior of hot mix asphalt incorporating glass fiber (GF) in northern Peru
- 1639: Bonding Between Three-Dimensionally Printed Rebar and Three-Week-Old Conventional Concrete
- 1683: Lean Manufacturing Tools and Their Benefits in Industries – A Systematic Review of the Literature
- 1687: COMPRESSION AND FLEXURE RESISTANCE OF TRADITIONAL ADOBE REUSING CRUSHED CLAY BRICK WASTE, CAJAMARCA 2023.
- 1771: The BIM implementation journey in Nuevo Leon, Mexico
- 1791: Validation of the theoretical study of the thermal transmittance of a wall, built with non-traditional materials using a test cell
- 1794: Methodologies for the prevention of occupational and ergonomic risks in the construction sector: A systematic literature review
- 1825: Double Recycled Asphalt Treatment as Subbase for Hydraulic Concrete Pavement
- 1881: Influence of polypropylene fiber on physical-mechanical properties in cold asphalt mixture with 100% recycled pavement
- 1887: Road condition monitoring by IRI using sensors implemented on an ATV
- 1890: Addition of Portland Cement and Terrasil in Soil Stabilization in Peruvian Highways

Computer Science, Computer Engineering, Data Science, and Software
- 108: Embeddings de Tokens Iniciales de Modelos Basados en BERT para Identificar Texto Escrito por Humano o Generado Automáticamente
- 109: Un Enfoque a los Tokens Iniciales de las Capas de Atención para Detectar Cambios de Autor en Textos Multi-autor.
- 117: Algorithm for Object Collection Using a Robotic Manipulator and Machine Vision
- 197: Ethnography in the Application of Information and Communication Technologies: A Systematic Review of the Literature
- 201: Systematic Review of Authentication Techniques in Banking Applications in Latin America
- 227: Integrated Recommendation System in ChatGPT to Analyze Post-purchase Behavior of E-commerce Store Users
- 233: Integration of GeoGebra and Maple in the construction of mathematical competences in civil engineering students in a private university, Cajamarca
- 238: Mobile Application Based on Virtual Reality to Improve the Communication of Children with ASD from 3 to 7 Years
- 245: Measurement and improvement of the reliability in the competency assessment of the engineer's training.
- 248: Predictive Model Based on Machine Learning to Decrease Patient Attrition in Health Care Institutions in Lima Using Python
- 258: The influence of social networks on the generation of disinformation in the near future
- 359: Towards a capture tool for appropriate technologies identification and characterization in Colombian agricultural sector
- 361: Design of a Python programming course by big ideas with a STEM approach
- 368: Quality assessment of work-life using Artificial Intelligence and Big Data
- 382: Digital transformation and the challenges of the accountant, an analysis of the current challenges for accounting professionals
- 438: Convolutional Neural Network for glaucoma detection in fundus images
- 443: Accounting automation and its impact on the financial situation of a transportation company: The Peruvian case
- 473: Natural Language Processing (NLP) to identify the resilience of the return to face-to-face classes at a university
- 479: Disease detection system in rice leaves, using Deep Learning models
- 498: Employee attrition prediction using machine learning models
- 509: Agile Software Projects in Engineering Degree Projects
- 549: Use of Big Data and Predictive Analytics in Digital Platform Marketing: A Systematic Review
- 555: Lean Manufacturing tools integrated with Industry 4.0 technologies for operational efficiency: Systematic review
- 562: Chatbot in Emotional Support Against Anxiety and Depression for High School Students at an Educational Institution in Trujillo, 2023
- 571: Predictive Model to Reduce Undergraduate Student Dropout at the Army Scientific and Technological Institute of Peru
- 574: Enterprise Resource Planning for the Business Management of an SME Company in the Environmental Sanitation sector
- 576: Business architecture model based on the TOGAF method for the travel and tourism agency “Viajes Reales SAC
- 609: Digital marketing strategies and positioning in SMEs marketing children's clothing.
- 619: Evaluation of the impact of a web application on tourism management in the province of Cajamarca, Peru
- 623: Plant health: web application for detecting diseases in coffee plants in northern Peru
- 626: The Incidence of Investment in Information Technologies on the Innovative Productivity of Service Firms
- 636: Influence of chatbots on the export of information technology services in Asia: bibliographic review period 2019 - 2022
- 664: Artificial Intelligence for the Prediction of Bearing Failures in Industrial Machines Based on Data Entry: A Systematic Review
- 695: DECT Evolution towards Meeting the Requirements for IMT-2020 in the Residential Environment
- 698: Analysis of Organizational Efficiency through Documentary Management Systems
- 706: Design of a Harvesting Machine for the Collection of Fresh Asparagus using Artificial Vision
- 711: Mobile Applications for Personal Financial Management in the Digital Era: A Systematic Review
- 721: Use of the Chatbot as a virtual assistant in learning platforms
- 723: Machine Learning in Cybersecurity: Systematic Literature Review
- 736: Application of Artificial Neural Network Methodology for the Prediction of Labor Productivity in the Construction Sector
- 747: Use of chatbots based on artificial intelligence for higher education
- 758: MOBILITY PATTERNS IN TELECOMMUNICATIONS OPERATORS CUSTOMERS
- 781: Computer Vision Algorithm for Identifying Rivers as Indicators of Potential Flood
- 793: DEVELOPMENT QUALITY CONTROL SYSTEM THROUGH ARTIFICIAL VISION FOR THE DETECTION OF STAINS GENERATED BY CELL BREAKS IN CANNED ARTICHOKE
- 816: Development an artificial vision algorithm to detect the Alternaria Alternata disease in the citrus limon plant of the “Fundo Amada”
- 818: Increasing Durability: Influence of Hard Coatings on Wear Resistance, Hardness, and Microstructure by the FCAW Process.
- 836: Internationalization of companies through digital transformation: a literature review of the last five years
- 858: Design and Implementation of a Delta-type Parallel Robot with Artificial Vision to for object tracking
- 871: Redesign of the relational database course using the backward design approach
- 877: Framework to Automate the Reimbursement in the Courier Service in Peru based on Blockchain
- 885: A Bi-objective A* minimizing travel times and failure rates
- 887: The trajectory of artificial intelligence in postsecondary education: A systematic review of the literature 2019 - 2023
- 895: Sentiment Analysis in the Measurement of Student Satisfaction: A Comparative Approach to Results
- 908: Non-Invasive River Level Measurement Using Trainable Segmentation in Computer Vision
- 924: Quake100: A Neural Network-Based Application for Predicting Earthquakes in Peru
- 933: Lessons learned in post-pandemic: Implications of teleworking for technology-based professionals in Costa Rica
- 940: Web-Based System for the Diagnosis of Skin Lesions Using Deep Convolutional Neural Networks and Transfer Learning Techniques
- 950: Automated Detection of Chagas Vector Using Artificial Intelligence
- 960: Machine Learning applied in personnel selection processes: A systematic review.
- 961: Artificial vision algorithm for the detection of Apodemus sylvaticus rodent pests in corn crops (Zea mays L.)
- 970: Artificial intelligence technologies to enhance learning in higher education: A systematic review
- 998: Carbon Monoxide Detection and Monitoring System
- 1000: Cultivating Creativity: A Journey in the Fundamentals of Information Technology Infrastructure Course
- 1016: Brain-Spine Interface: A Promising Technology to Improve Mobility in Spinal Cord Injuries
- 1018: Advancements and Applications of Machine Learning in Detecting Radon Nuclear Tracks from 2001 to 2023: A Bibliometric Analysis
- 1021: Detect if an academic monograph was made by an Artificial Intelligence system, using Machine Learning
- 1026: Algorithms Based on Artificial Intelligence for the Detection and Prevention of Social Engineering Attacks: Systematic review
- 1027: Development of an Artificial Vision Algorithm for the Classification of Export or Domestic Consumption Strawberries
- 1031: Data Warehousing Architecture Model Applying Business Intelligence for Small and Medium Enterprises
- 1044: Identification of prospective targets in mining, applying ASTER images, Michiquillay - Cajamarca, 2023
- 1045: Comparative study on the use of virtual reality technology as a treatment for claustrophobia
- 1053: Analysis of the use of Convolutional Neural Networks for facial recognition in the district of San Juan de Lurigancho
- 1064: Mobile Application for the Recognition of Minerals
- 1070: Chatbots at the Service of Society: A Systematic Review of the Last 10 Years
- 1073: Artificial intelligence algorithms used in autonomous driving to reduce private vehicle accidents: A Review.
- 1097: Credit Risk Management in the Financial Sector Using Machine Learning as a Tool: A Systematic Literature Review
- 1130: Use of Machine Learning in Hospital Emergency Care for Patients
- 1131: Impact of Water Stress on the Quality of Life of Residents in Miramar and Paramonga Housing Programs
- 1185: Data science-based tool to reduce measurement errors in atmospheric monitoring systems
- 1193: Design and implementation of a web system to improve the commercial management of the Tailoring business.
- 1206: Cybersecurity for the Protection of IOT Devices in the Industrial Sector
- 1207: Approach for the Detection of Early Carious Lesions Based on Intraoral Photographs Using YOLOv7 and Faster R-CNN
- 1275: Importance of usability testing in software development: a bibliographic review
- 1290: Factors influencing the adoption of cloud computing by SMEs in developing countries: A review of the literature.
- 1293: Garment classifier model based on Neural Networks
- 1316: Predictive modeling based on machine learning strategies to forecast student dropout at a Peruvian university: A case study
- 1317: Intelligent Air Quality Monitoring in Industrial Environments: AI-based Prototype for Health Risk Detection
- 1336: Tools in Model -Driven Web Development: A Systematic Mapping Study
- 1349: STRATEGY BASED ON ARTIFICIAL VISION AND SOM NET FOR THE CLASSIFICATION OF MARBLED MEAT
- 1351: Development of an artificial vision algorithm to detect the Huanglonbing disease in the citrus lemon plant of the “Fundo Amada”
- 1355: Implementation of Standard Symmetric Algorithms for data encryption: Systematic Review
- 1357: Develop of an D-STATCOM prototype connected to the electrical power line
- 1375: Development of an algorithm to detect the Bloom effect on the blueberries
- 1376: Aplicación de un asistente virtual inteligente para el servicio de atención al estudiante en las universidades
- 1379: Mathematical Foundations for Machine Learning
- 1380: Development of Management Software for Accreditation experience in CAPSTON course
- 1400: Ambient Intelligence: Development of Control System Applied to Quadcopter Drone throughAmazonAlexa
- 1402: Effectiveness of Machine Learning in environmental pollution from remote sensing images
- 1404: Anomaly Detection for Chicken Rejection using Convolutional Neural Networks
- 1411: Occupant behavior and air conditioning usage revealed from sensor fusion applying the k-means clustering method
- 1412: Predicting Student Performance in a Non-linear Self-Paced Moodle Course
- 1426: Application of AI to predict academic performance and prevent dropout in higher education (RSL)
- 1451: Análisis de mejora para la gestión administrativa mediante el uso ERP en las empresas de Lima
- 1453: Analysis and Implementation of Technical Standards for Planning and Coordination in the Virtual Construction of Investment Projects
- 1473: CepalStatR: an R package for accessing ECLAC statistics
- 1481: Generative Artificial Intelligence and its impact on the educational quality of students: Systematic Review
- 1488: ITIL Implementation: Information Technology Incident Management for a Chemical Importing Company
- 1491: Modelo de identificación de Covid-19 usando técnicas de Deep Learning a partir de imágenes Rayos X de tórax de pulmones
- 1512: Computer Numerical Control (CNC) Training Program to strengthen professional competencies in university technical education
- 1543: FOMO Model Based Logo Detection in Embroidery Process
- 1547: Maturity Model Based on a Suitability Approach for the Evaluation of Chatbots Used in Depression Detection
- 1548: Information System for price comparison and prescription reading using automation technologies and digitalization of texts for pharmacies in Peru
- 1555: Virtual Reality System to Improve the Training of Personnel on Risk Prevention in an Industrial Company
- 1570: Artificial neural network with perceptron competitive advantage according to internal and external factors in response to demand: Chancay Megaport.
- 1571: Predictive analysis model to define behavioral patterns of landslide for early warning based on machine learning
- 1574: Artificial Intelligence methods in the diagnosis and treatment of chronic diseases
- 1587: WhatsApp: An Autonomous Alert System for Emergencies and Disasters
- 1588: ChatGPT in the Generation of Explanations for Cyber-Physical Systems
- 1591: Aeration Strategies in the Treatment of Effluents from a Pig Slaughterhouse Using Sequential Batch Reactors
- 1610: Use of the electronic table of parties and its effectiveness in the administration of justice in the Republic of Peru
- 1617: Branding analysis in the Facebook posts of a private educational institution in the district of San Juan de Lurigancho, Lima
- 1622: A Practical Case of Learning Muscle Fatigue Based on a sEMG Signal Using Bitalino Kit
- 1636: Development of a neural machine translation model optimized with BERT for translation from Quechua to Spanish
- 1642: Evolution of Internet Access and Usage in Panama in the Context of the Global COVID-19 Pandemic
- 1652: ANN-based Prototype for the Prediction of CO2 Pollution Levels: Eco-Logica
- 1659: Strategy for teaching Probability in Engineering through Monte Carlo Simulation.
- 1671: Exploring the Influence of Chatbots in Healthcare: Systematic Review
- 1672: Usability measurement model of the human-robot interactive communication interface for human assistance tasks
- 1680: Sorting algorithm for product classification using deep learning
- 1682: Machine Learning Models for Money Laundering Detection in Financial Institutions. A Systematic Literature Review
- 1703: IMPACT OF DIGITAL TECHNOLOGIES ON THE PERUVIAN FOOD INDUSTRY: R.S.L.
- 1707: Knowledge Management Model Applied to Information Security and Knowledge Protection
- 1713: Diachronic spatial analysis: the case of floods in the Luján River, Argentina.
- 1725: Business intelligence dashboard as a technological innovation for analysis on digital transformation in education
- 1729: LiteNetPose: A lightweight neural network for human pose estimation using attention modules
- 1734: Empirical model to estimate ultraviolet index values in the Puno region
- 1750: APPLICATION OF THE HAZARD IDENTIFICATION AND RISK EVALUATION MATRIX AND CONTROLS (IPERC) IN THE REDUCTION OF OCCUPATIONAL RISKS
- 1754: Harvesting piezoelectric energy on a highway in Callao to charge low Callao to charge low-consumption equipmentFirst
- 1757: Use of cluster analysis to study crime in the State of Rio de Janeiro
- 1758: THE HEALTH AND SAFETY MANAGEMENT SYSTEM AT WORK AND THE REDUCTION OF OCCUPATIONAL ACCIDENTS
- 1767: Navigating Ethical Frontiers: Exploring the Impact of Artificial Intelligence Integration
- 1769: Usability Study on Data Protection Automated Policy Reviewer Tool for the Jamaica Data Privacy and Protection Environments
- 1772: Detection and counting of vehicles using deep learning in a parking lot area of a university institution
- 1776: Design of transradial prosthesis for amputee patients from the parameterization of a 3D model using digital image processing
- 1781: Logarithmic Loss in Machine Learning Models for Liver Cirrhosis Detection.
- 1787: Increasing Quality in Deep Learning Models through Stratification
- 1795: Machine Learning Surrogate Dynamical System Model for Thermal Energy Storage
- 1808: Evaluation of the level of accuracy of matching multispectral aerial images through the "Siamese" neural network model
- 1812: Plataforma web de apoyo a regulación de precios de venta de los productos agrícolas en la región del Catatumbo, Colombia
- 1830: Machine Learning model for the diagnosis of melanoma in early stages
- 1852: STUDY CASE: ROBOT SELECTION BASED ON SIMULATIONS AND FINANCIAL INDICATORS
- 1873: TRIP a-Bike: An Interactive Educational System for Learning English as a Second Language
- 1905: Certificados digitales con firma digital para mejorar la atención del servicio de Depósito Legal en la Biblioteca Nacional del Perú
- 1908: ROS and FPSoC Integration on a Turtlebot 3 Robotic Platform
- 1922: Computational characterization of the magnetic force and stability of passive magnetic bearings with diametrical magnetization
- 1924: A Mobile Robot with Deep Learning for Monitoring Coffee Farms
- 1938: Air quality measurement and prediction system using artificial neural networks
- 1939: Design of a semi-automated rotary machine for the pipe welding process in the metal-mechanical sector.
- 1941: Bibliometric Analysis of the Scientific Production of Universities in Central America (2018-2022) Based on SCImago Data
- 1946: Exploring Therapeutic Horizons: A Bibliometric Analysis of the Use of Virtual Reality in the Treatment of Schizophrenia
- 1957: Innovative Proposal for the Coffee Management of the Orozco Farm Using Devices from the Internet of Things (IOT)
- 1970: Drones in sustainable agricultural systems: A literature review
- 2014: Diseño, Desarrollo e Implementación de un Programador Inalámbrico para el Ecosistema Arduino
- 2026: IMPACT OF TEACHING MULTIVARIATE MODELING WITH DIGITAL TOOLS ON THE DEVELOPMENT LEVEL OF EXPERIMENTAL DATA ANALYSIS AND INTERPRETATION SKILLS
- 2040: Evaluation of the Calibration of Outside Micrometers by Statistical Repeatability Analysis
- 2043: Laminar Flow Simulation Between Parallel Flat Plates using OpenFOAM

E-Learning
- 112: Industrial Systems Simulation Applied to Laboratory Practices in the Industrial Engineering Degree
- 356: Application of Six Sigma to improve the process of curriculum change in a Higher Education Institution
- 423: Informative disorders in initial digital circulation news articles on ChatGPT
- 436: Impact of the virtual forum as a strategy in the writing of expository texts
- 508: Methodological development and teaching skills based on ICT to improve the level of education in marginal areas of Ecuador.
- 554: The ChatGPT Application: Perceptions of University Communication Students from Ecuador and Peru
- 566: APLICATIVO MÓVIL EN EL RENDIMIENTO ACADÉMICO DE ESTUDIANTES DEL TERCER GRADO DE SECUNDARIA EN LA INSTITUCIÓN EDUCATIVA PRIVADA , 2023
- 595: A playful approach: Influence of gamification on the learning of children with visual and hearing disabilities in northern Peru
- 602: New educational perspectives: video games and their impact on the teaching-learning process in primary education
- 647: Assessment as a Fundamental Pillar in Engineering Education: Experiences in Research Projects
- 659: Video Games of the MOBA Genre and Interactions Discriminatory in a Gamer Community in Lima
- 676: Automated Classroom Attendance using a Machine Learning-Based Recognition System
- 868: Use of social networks and their impact on the commission of the crime of homicide
- 936: Use of Artificial Intelligence and its effectiveness in the administration of justice in the Republic of Peru: Chatbot application
- 1013: Development and use of an Excel application called Davalos Magic Box to self-assess knowledge of career competencies in Computer Science
- 1088: Artificial Intelligence and its influence on Auditing Processes in large auditing companies in Lima 2023.
- 1090: Robotic Process Automation: Ratification, Evaluation and Qualification of Teachers
- 1174: Design of an Automatic Sixpack Bottle Filling System using RFID Technology for adaptation to The Lucas Nülle IPA23 Plant
- 1226: Tablet Use and Learning in Science and Technology in an Indigenous Technology in an indigenous community of the Peruvian Amazon
- 1254: Analysis of visits to the Ricardo Palma University Natural History Museum using the T distribution
- 1289: Explorando el impacto de los textos expositivos en el aprendizaje del estudiantado: una revisión sistemática
- 1343: Connectivism and its impact on English language learning at a State University
- 1345: Impact of technostress in the research culture among teachers of a national university in Peru.
- 1350: Design and evaluation of a new pedagogical approach to improve the learning of quality tools in an Engineering undergraduate program
- 1444: Digital platforms and cooperative work in Electronics and Computer Science students.
- 1486: Self-Regulation Strategy for Work College Student Online Collaborative
- 1495: Gender Disparities in Digital Technology Engagement: A Study of Student Participation in Art Classes
- 1528: Social networks and their mediating effect on school achievement, enjoyment and anxiety in secondary school students
- 1556: Network Management Laboratory with Open Source Software
- 1561: Technological management model for the use of ICT in the writing of argumentative texts at the university.
- 1582: Mobile Device Use in the Development of Research Skills in Students at a Public University in the Cajamarca Region
- 1716: A project-based learning approach for university students in biomedical engineering
- 1732: VIRTUALITY AND QUALITY OF LEARNING RESULTS IN HIGHER EDUCATION STUDENTS
- 1733: Online International Collaboration Experience for Global Problem Solving from an Engineering Perspective
- 1765: Enhancing Autonomous Learning in Maker Spaces: The Impact of Augmented Reality Tutorials at the Innovaction Gym
- 1780: Cognitive crisis and the role of Artificial Intelligence. Challenges for the 21st-century educator.
- 1793: Digital consumption in university students of the Central District in Honduras
- 1864: Satisfaction of Peruvian university students with Distance Education
- 1875: Effect of ultrasound on the concentration of phenolic compounds and antioxidant capacity during the preparation of Berberis vulgaris leaves extracts
- 1901: Transforming Education: Energy Efficiency Training Targeting School Students.
- 1921: Didactics 2.0 for information management and digital skills of teachers
- 1934: Impact of Technology on the sustainable development of vulnerable communities in the State of Mexico.
- 1950: Industry-Academia Collaboration Applied in Research of Power Systems and Components
- 2005: Automated hydroponic greenhouse customized for a variety of plants for family food.
- 2017: Exploring Intelligent Tutoring Systems: Integrating GAI and Advanced Pedagogy for Design, Challenges, and Potentia

Electrical and Electronics
- 120: Protection of single busbar substations through coordination between overcurrent IEDs and the transformer differential based on IEC 61850
- 764: Developement of a radio-controlled mobile robot applied to underground mining
- 789: Sistema de comunicación inalámbrica entre nodos de sensores ambientales
- 833: Design and Implementation of an Omnidirectional Robot with a 5-Degree-of-Freedom Robotic with Bluetooth Control
- 901: Use of residual purple sweet potato (Ipomoea batatas L.) skin pigment in dye-sensitized solar cells
- 1014: Implementation of Topologies in Systems Public Lighting with Micro-Inverters and Injection to the Grid with Solar Energy Photovoltaic Using Etap
- 1063: Regenerative Braking System for an Electric Motorcycle Model Sakura M500
- 1092: Wireless Sensor Networks and IoT Applied to Fruit Tree Cultivation in Boyacá, Colombia: An Innovative Approach in Agriculture
- 1395: Electrocardiographic Analysis of Five Canine Breeds Using an Arduino UNO Prototype: A Signal Evaluation
- 1566: Improvements in energy efficiency in a thermoelectric generation plant
- 1568: Initial Validation of ELENA: an affordable device for monitoring tremors in Parkinson's patients.
- 1613: Mechatronic design to improve bakery product packaging tailored for small-sized businesses
- 1738: Design of an automated irrigation system using PLC and Internet of Things to improve corn production in the Junin, Peru
- 1820: Analysis and Design of a Photovoltaic Power Plant to Improve the Electrical Service in the Island District of Anapia
- 1835: Low-cost datalogger for biofertilizer valorization as a strategy for mitigating climate variability
- 1937: Parameter determination and evaluation of a Thévenin dynamic model for a li-ion cylindrical cell used in CubeSat applications

Energy and Water
- 116: Design of two-dimensional solids for the reduction of velocities and pressures in water resources using CFD and Inventor software
- 175: Study of semicircular sections through CFD software for rainwater retention in arid areas
- 176: Design study for hydraulic energy dissipator in streams using Autodesk CFD
- 177: Generation of monthly flows in the Casma River basin up to the Tutuma Hydrometric Station using the GR2M precipitation-runoff model
- 202: Analysis of economic viability of photovoltaic systems in residential areas considering incentive policies
- 203: Analysis of photovoltaic hosting capacity calculation in electrical distribution networks
- 205: Spatial distribution estimation of residential photovoltaic systems diffusion using binary logistic regression
- 207: Determination of Microplastics in Sediments of the Mashcón River, Cajamarca - Perú 2023
- 211: Wastewater Treatment from the Colpamayo Creek Using Artificial Wetlands with Schoenoplectus Californicus and Phragmites Australis
- 215: Proposal to expand the pumping system for treatment and recirculation of underground water in a mining operation
- 236: Geostatistical Model Construction for Oil Reservoirs: Equivalence of Vector Property Components to their Simulation
- 308: Removal of total suspended solids from dairy wastewater using an electrocoagulation cell in the district of Ayaviri, Puno, Perú
- 406: Bioaccumulation of mercury in shrimp with respect to the concentration in waters and sediments of the Ocoña River (Camaná-Arequipa)
- 409: Reduction of Water Scarcity in Water Management Boards of the Central District with Linear Programming
- 579: Analysis of a photovoltaic system and its influence on the carbon footprint of a University in Moche 2023
- 682: Design and Construction of a Biodigester for the Production of Biogas from Cattle Manure.
- 745: Energy Performance Design and Analysis of a Passive Collector System Applied to an Andean House
- 831: Energy characterisation and savings opportunities in an aquaculture company
- 849: Geothermal Energy. An Additional Resource for the Energy Transition in Venezuela
- 851: Improved Prediction of the Stratified – Non-stratified Flow Pattern Transition in Gas-Liquid Mixtures
- 854: Performance Analysis of a Phase Change Material in Cooling process: A CFD Study on a Flat Plate
- 891: Aquaopinic system for small-scale food production.
- 894: Control Scheme for Energy Management in Microgrids with Storage System: A Rural Area Analysis Case Study
- 929: Thermal Performance Assessment of Windcatchers in Tropical Climate: A Case Study in a Single-story Building
- 976: IMPLEMENTATION OF A MODEL FOR WATER RESOURCE RISK MANAGEMENT
- 1015: COAL DESULFURIZATION BY LEACHING WITH NITRIC ACID FOR THE MANUFACTURE OF BRIQUETTES IN THE LLARAY HAMLET - LA LIBERTAD, 2023
- 1124: Energy Education under the Living Laboratory Framework: Methodology
- 1126: Stochastic Analysis of the Flow of the Vilcanota River in the Machupicchu Hydroelectric Power Plant using ARIMA models 2023
- 1161: Determination of the Impact of Water Footprint on Rice Crops in Northern Peru
- 1167: Kinetic study of removal of the dispersed blue 124 dye from water using avocado seed Fuerte variety as adsorbent
- 1176: Contrasting perceptions: A comparative study between residents and non-residents of Lake Yojoa
- 1200: Modeling and Simulation of Blowdown in High-Pressure Gas Pipelines: A Comparative Approach in Real Scenarios
- 1211: Development of synthetic FZI curves by petrophysical characterization from Open Hole logs, CMR and core analysis
- 1218: Methodology for selecting rural energy alternatives applied to the Colombian context.
- 1227: Model for improving the power distribution network through a generator set to meet the maximum demand at a mining site
- 1228: Estimación del poder calorífico superior de una mezcla de aserrín y cascarilla de café
- 1233: Revisión sistemática: Tecnologías de Generación de Hidrógeno Mediante Energía Solar
- 1248: Revisión Sistemática: Innovaciones Tecnológicas Implementadas en Ciudades Inteligentes para Mitigar la Escasez de Agua
- 1269: PETROLOGICAL CHARACTERIZATION OF VOLCANIC ROCKS IN THE LLUSCAPAMPA LANDSLIDE, CAJAMARCA-2023
- 1284: Effect of Non-Darcy Flow in Transient Pressure Behavior with Poroelastic Dual-Permeability After-Closure Analysis of Fracture Test
- 1323: Structural control and placement of mineralizing fluids in the El Gigante deposit, Llacuabamba – Pataz annex – 2023
- 1372: Energetic Evaluation of Hydrogen/Natural Gas Blends Transport through TGP Pipeline
- 1392: Coin-cell supercapacitors based on biochars: assembly pressure influence
- 1403: Digital Transformation in Mini Power Plants: Optimization of Hydroelectric Turbines with Neural Networks
- 1405: Quantification of the Wave Energy Potential of the Gulf of Fonseca Coastline in Honduras
- 1414: Transition to sustainable mobility: electric motorcycles as substitutes for gasoline-powered motorcycles.
- 1423: Obtaining and Characterization of Liquid Fuels Obtained from Co-Pyrolysis of Disposable Glove Waste
- 1428: Modeling and simulation of automotive urea production in Peru.
- 1450: GEOLOGICAL STUDY TO IDENTIFY EXPLORATORY TARGETS IN THE CORAQUILLOC PROJECT, HUAYLAS, ANCASH, 2023
- 1499: Use of Peruvian dye, Ayrampo (Opuntia Soehrensii) as a sensitizer in Grätzel cells of TiO2, using graphite as a counter-electrode
- 1516: Estudio del Comportamiento del Flujo Líquido – Líquido en el Coeficiente de Pérdida de Energía en Expansiones y Contracciones Súbitas
- 1529: A review: path to carbon neutrality to achieve environmental sustainability
- 1557: Ethylene production by gas phase catalytic dehydration of ethanol
- 1577: Proposal for the restoration of the Cusagueta stream, as a supply source for the municipal aqueduct of Málaga, Santander, Colombia.
- 1584: Rice Straw and Sugarcane Straw Agrowaste for Energy Production: Physico-chemical Characteristics and Prediction of their Thermal Behaviour
- 1592: Impact of Dispersed Phase Salinity of W/O Emulsions, on Crude Oil Electrostatic Dehydration Process.
- 1628: Analysis of Enhanced Oil Recovery by Micelles in the Oriente Basin of Ecuador
- 1632: Solar Cooking Assessment: Efficiency and Feasibility using a Parabolic Solar Reflector Francisco de Yojoa, Cortés, Honduras
- 1647: Application of Thermal Soil Freezing for Temporary Self-Support in Mining Tunnel Construction Across Saturated, Sandy, Clayey, and Silty Rock Formations
- 1648: Integrating Usability Principles through Gamification: A Case Study
- 1657: Progress and challenges in drinking water access and poverty: A bibliomtric analysis (1995-2023)
- 1678: Level of bacteriological contamination of the air in the wastewater treatment plant of the city of Celendín and surrounding areas
- 1696: Modelo para Proyección de Consumo de Energía según el Balance Energético del Perú, considerando propuesta Energética de Sistema de Nanoredes
- 1709: Towards Self-Sufficiency: Cogeneration Opportunities for the Hotel Industry in Puerto Rico
- 1710: Freshwater production from Humidity under the appropriate technology paradigm: case study in La mesa de los Santos, Colombia.
- 1715: Towards Sustainable Energy: Modeling a modified 50kWp Photovoltaic PEM Electrolysis System for Green Hydrogen in Tegucigalpa
- 1741: Design of a Hydro Drone collecting water samples in lakes and lagoons at different depths
- 1768: Two-dimensional numerical study of the velocity profile in an incompressible laminar flow with solid particles on a flat plate
- 1804: Kinetic Modeling of the Thermal Degradation of the Vacuum Residual using the Starink Isoconversional Method
- 1806: Development of a Static Pressure Test Bench to Verify the Absence of Leakage and Physical Damage in Drinking Water Meters
- 1816: Evaluation of the Efficiency and Control of a 250 W Solar Micro Inverter Connected to the Electrical Distribution Network.
- 1834: EXPERIMENTAL DEMONSTRATION OF THE ENERGY CONSERVATION OF WATER BY APPLYING THE BERNOULLI PRINCIPLE
- 1838: W/O Emulsions: Destabilizing Factor
- 1848: Statistical Analysis of The Effectiveness of An Electrocoagulator In The Process Of Cleaning Wastewater From The Rio Blanco River
- 1858: Iron Electrocoagulation of Soybean Oil Refinery Wastewater with SuperPro Designer® Simulation
- 1859: Analysis of vertical flow velocity and suspended sediment concentration profiles in Tumbes River during El Niño and La Niña events
- 1891: Numerical evaluation of heat transfer parameters in shell and tube exchangers using water-based TiO2 nanoparticles
- 1895: An approach to the design of an EV charging station, with a supply of renewable energy and green hydrogen, monitored
- 1899: Contribution and perspectives of microalgae in industrial wastewater recovery: A literature review,2014–2024.
- 1909: Evaluation of the Operational Performance of a Solar Microinverter in the Puno Highlands Region
- 1916: Theoretical calculation of energy conversion efficiency of an InGaN/InN quantum well intermediate band bifacial solar cell
- 1942: Pore Network Modeling of Polymer Flooding and Retention for Increased Oil Production

Entrepreneurship and Innovation
- 141: Improving Service Levels in the Hotel Industry through a Lean Service Model: A Case Study
- 142: Improving Availability in a Retail Laundry by TPM, 5S, and Standardized Work: An Empirical Research
- 171: Production model based on Lean Manufacturing-TPM to increase the service level in a SME in the food sector
- 198: Curative architecture, as a regeneration strategy for a vulnerable population with psychological problems
- 208: Evaluation of School Snack in Educational District Ten, Francisco Morazán through Industrial Systems Simulation
- 231: Ultrasound application to conserve the antioxidant properties of pitahaya
- 246: DATA DRIVEN AND KANBAN: An integrated model to optimize the inventory control of a commercial company
- 247: Factors affecting the use of Maker Route E-learning management systems for the development of digital manufacturing skills in higher education
- 250: Entrepreneurial Intention: A Perspective from the Perception of University Students in Lambayeque, Peru
- 292: Effect of Mobile Wallet Service on Customer Satisfaction and Loyalty: A Look at the Consumer in Lambayeque – Peru
- 304: Online Green Purchase Intention in the North Macroregion of Peru: The Moderating Role of Customer Behavioral Aspects
- 314: Management model using Lean service and digital transformation to increase profitability in a software development SME in the digital economy
- 317: Strategic Sustainable Manage Model, Applying Circular Economy Rate Operating Process, to Renewable Energy
- 334: Perception of University Students Regarding the Corporate Reputation of a Private University in the City of Trujillo.
- 338: Approaches to business innovation applied in the food industry: A brief review
- 344: The application of the 5s Methodology in manufacturing companies in the automotive sector in central Lima, 2023
- 357: Dynamics of the Agricultural Export Market in Peru
- 373: From Status Quo to Vanguard with the FIFO Methodology: The Efficient and Competitive Engineering that Drives Change at Burger Truck
- 400: Transformational Leadership and Service Quality in Community Service Organization, 2023
- 412: Universities as Drivers of Social Change: Fostering Innovation and Entrepreneurship for a Sustainable Future
- 413: Occupational risk management to increase productivity in the installation of high voltage towers of an electrical services company in Peru
- 415: Design and implementation of Preventive Maintenance and 5'S tools to reduce costs in a bakery company
- 422: Business Strategy and Competitiveness in the Garment Sector of MetropolitanLima,Peru
- 424: Citizen security management and use of technology in a Peruvian district municipality
- 428: Management of internal quality processes and their relationship with the competitiveness of Agronegocios Adriancito S.A.C., Trujillo, 2023
- 447: Implementation of the ABC and Kardex Classification to reduce the inventory costs of the company Corarvi Deliverycenter S.A.C.
- 449: Layout and MRP to reduce costs in a SME of the retail sector
- 453: Application of 5S and standardized work to improve labor productivity: Case of textile SME
- 461: Perceived situational fit as part of the development of the entrepreneurial environment in an learning management model in incubators
- 463: Relationship between the reduction of global import tariffs and economic growth: An empirical approach
- 485: Analysis of the Competitiveness of Peruvian Coffee for Export to the United States 2013-2022.
- 492: Analysis of the Diversification of Exports in Peru's Fishing Sector 2000 – 2022
- 507: Palm oil export diversification in Peru 2013 – 2022
- 512: Peru fishmeal exports, 2018-2022
- 514: Sustainability of avocado exporting companies in Peru through a survival analysis
- 516: Analysis of the survival of coffee exporting companies in Peru: a temporal perspective (2012-2023)
- 518: Peru's agro-export sector: an evaluation of the survival of micro, small, medium and large companies
- 529: Working environment and employee job performance in a Peruvian customs operator company in Callao, Lima 2022
- 531: Business Intelligence Design and Decision Making to improve the Information System in the Regional SubManagement of Institutional Development Piur
- 532: Application of digital marketing in a Peruvian company that sells alternative medicine products 2023
- 545: Fiscal culture and its relationship with entrepreneurs’ compliance with tax responsibilities in a market of Trujillo, 2023
- 548: Market segmentation in Marketing. A studio in a natural destination
- 552: Consumer behavior in Marketing: Sociodemographic aspects, satisfaction and loyalty
- 559: Green marketing and purchase intention of Peruvian consumers. An empirical study.
- 563: Gastronomic marketing applied to motivations and satisfaction
- 565: Relationship marketing and customer retention in a Peruvian service company
- 582: Technologies of Industry 4.0 for the next fashion revolution: A systematic literature review
- 590: BTL strategies for customer loyalty in the health sector: Chiclayo Health and Wellbeing Case
- 591: Experiential Marketing and Customer Loyalty in Peruvian companies: D’Pùlpa Case
- 598: Digital Marketing Strategies in a Mype in the Printing Sector
- 605: Rebranding and brand positioning in customers of a gastronomic company
- 635: Innovation, Development, and Sustainability of Agricultural Export Sector in Peru to the European Union
- 642: Lung noise recognition employing convolutional neural networks
- 652: Impact of a digital marketing plan on the sales of a telecommunications and electronic security company
- 658: Impact of Fast Fashion on the Environment: A Systematic Review (2013-2023)
- 691: University Social Responsibility and its impact on the consumer in Latin America: A systematic review of the literature 2013-2023.
- 703: Current trends in Industry 4.0 and Supply Chain from 2020 to 2023: A Systematic Literature Review
- 734: Impact of low quality diesel on the performance and maintenance costs of transportation equipment: a case of study
- 799: TALKING SPACES: THE DIALOGUE BETWEEN SIGNS, ARCHITECTURE AND PEOPLE.
- 806: Perceived Value and Online Purchase Intention: Mediation of Electronic Trust in Lambayecano Consumers
- 807: Real-time ergonomic evaluation method using artificial intelligence related to work in the mining sector
- 808: Sources of knowledge and innovation in Chilean manufacturing companies
- 823: Enhanced Experience in Research, Entrepreneurship, and University Social Responsibility for Technology-Based Entrepreneurship
- 828: Teamwork and Innovation Competence: A Comprehensive Analysis in the Context of Fruit Exportation
- 837: Leadership, Cultural Development, and Competitiveness in Asia Pacific Multinational Companies
- 848: Chinese Footwear Imports Subject to Antidumping Measures in Peru, 2017 – 2020
- 866: Current Research Trends on Last-Mile Logistics in Latin America during the Period 2017-2021
- 870: Analysis of Peruvian University Students' Perception on Multiple Dimensions of Educational Services
- 873: Strategic Profile of the Municipal Savings and Credit Banks in Northern Peru
- 926: Accounting ethics: The invisible fortress in the face of corporate fraud. A systematic review
- 941: Creating Experiences in Creative and Cultural Industries: The Impact of Museums as Epicenters of Innovation.
- 963: The Impact of Enterprise Resource Planning (ERP) Systems on the Purchasing and Inventory Processes in Construction Sector Companies
- 972: Bibliometric analysis of the evolution of smart ports and ships: trends and challenges
- 985: StockOdissey as a Gamified Strategy for the Development of Competencies in Inventory Management and Control
- 1011: Creativity and Entrepreneurial Intentions in Peruvian University Students
- 1022: Disaster Risk Management and Quality of Life in Vulnerable Areas in Lima, Peru
- 1066: Social Responsibility and Sustainability from the Customer's Perspective in a Hotel in Lima, Peru
- 1100: Strategic Organizational Capabilities and Supply Chain Performance in the Cloud of Ecuadorian Port SMEs
- 1135: Digital Marketing Strategies and Positioning of a Pharmacy in Lima, Peru
- 1155: Management of Human Talent and Work Commitment of Employees of the Regional Government of San Martin, Moyobamba
- 1158: Enhance digital marketing to achieve the growth and development of the microenterprise.
- 1165: Proposal to improve the profitability of quality management and production process in a tailoring company Trujillo, 2022
- 1177: IMPLEMENTATION OF QUALITY MANAGEMENT TOOLS TO REDUCE OPERATIONAL COSTS OF A TEXTILE COMPANY IN THE CITY OF TRUJILLO, 2023
- 1197: Model to improve the copper concentrate production process in a mine at Panama
- 1236: Trends, challenges and opportunities of digitalization in port management: a systematic review between 2018 and 2022
- 1247: Financial culture and financing decisions of small business owners in the context of an economic crisis, 2021
- 1257: Strategic Model for Customer Satisfaction in a Service Sector Company
- 1282: Unlocking Retail Success: A Comprehensive Exploration of Information and Communication Technology (Ict) Operations Practices in Nanostores
- 1315: Development of the structure of a BAJA type vehicle using CAE simulation tools
- 1381: Forging My Own Pages: A Strategy to Awaken Self-awareness and Creativity
- 1420: Fashion Industry, a review literature
- 1427: Sustainable innovation and management skills: pillars of effective business management
- 1431: Digital entrepreneurship and technological transformation within the reach of risk management in tourism.
- 1432: Selection of components to be repaired, according to failure, redundancy and uncertainty to improve system reliability.
- 1445: Evaluation and improvement proposal using Lean Manufacturing tools to increase the efficiency of the filled candy production line.
- 1465: Sustainable Entrepreneurship in Latin America: A Systematic Review of Spanish-language Scientific Literature in Scopus and Scielo Databases
- 1485: Business Architecture Model for a microenterprise in the textile sector
- 1511: Distribution channels and positioning strategies in a company in the restaurant sector, Perú – 2023.
- 1520: Simplifying the tax system and formalizing companies: APIAT Commercial Center in Trujillo, Perú
- 1525: Strategic Model for Process Management in an SME in the Commercial Sector in Trujillo
- 1542: Entrepreneurship and Female Leadership: A Systematic Literature Review from 2019 to 2023
- 1545: Process improvement applying the DMAIC methodology in a plastic injection plant
- 1553: Dynamics of the construction sector and mortgage loans in Peru (2017 – 2023)
- 1554: Environmental awareness and the impact on demographic growth in Las Lomas de Carabayllo
- 1569: Artificial neural network for finances in MYPES according to internal factors in response to the demand of the Chancay Megaport.
- 1576: Audit in the OHS-MS of companies from Manizales (Colombia): a system fissure
- 1589: Design of 5S and ATS to reduce costs in a metal-mechanical company
- 1594: Lean Logistics to reduce logistics costs in an SME, Lima - 2024
- 1595: Lean Six Sigma to increase operational efficiency in a coal mining company, Cajamarca 2024
- 1597: Insights into Collaborative Economy Research in Ibero-America: A Systematic Review of the Scientific Literature Available in Spanish in Scopus
- 1644: Ethical Commitment of Universities in the Face of the Need to Strengthen Scientific Research for Development
- 1650: Tax Planning and its Impact on the Tax Burden of a Small Metal-mechanic Company, 2022
- 1660: Improvement proposal applying Logistics Tools for Warehouses and Inventories Management in the company SOLAGRI PERÚ S.A.C.
- 1663: Transformational Leadership and Organizational Commitment: A Systematic Review, period 2018-2023
- 1665: ILVEM Method in Reading Speed and Comprehension in University Students
- 1666: Bibliometric Analysis of Research in New Technologies and Entrepreneurship
- 1674: Management Plan for Access to the Ancón Pozo 001 Geosite, Santa Elena Canton.
- 1681: Implementation of Lean Healthcare to improve customer care in a dental center- Cajamarca 2023
- 1692: Prototype for an Automated Home-use Coffee Roaster
- 1697: Business perception and change management for the use of virtual reality in an agro-export company
- 1714: Innovation Development in South American SMEs: Examining University Cooperation and Innovation Efforts through PLS-SEM
- 1718: Implementation of an E-Commerce Platform for Commercial Management in Companies dedicated to the Marketing of Household Appliances
- 1737: BEYOND THE OFFICE: TELEWORKING AND JOB SATISFACTION IN LIMA'S PUBLIC ADMINISTRATION
- 1746: Estimation of energy recovery through the implementation of electric generators in residential hydraulic networks.
- 1747: Organizational Climate and Service Quality in the General Services Area of the National University of Jaén
- 1749: Effect of partial substitution of wheat flour with Capparis Scabrida and Punica Granatum peel flour on sensory acceptance of bread
- 1775: Social Responsibility Trends in Industries, Over the Last 15 Years. A Systematic Review
- 1782: Analyzing Social Networks: Unveiling the Dynamics within the Honduran Entrepreneurial Ecosystem
- 1786: ENHANCING CRAFT SKILLS: THE VITAL IMPACT OF TRAINING IN THE CERAMIC INDUSTRY OF LIMA, PERU
- 1800: Digital marketing strategies for the sales management of an MSE in the restaurant sector
- 1807: Assessment of the Level of Digital Maturity Through a Process Analysis
- 1810: Impact of Continuous Improvement Methodologies on the Productivity of the Metalworking Industry: A Systematic Literature Review (2018-2023)
- 1814: Perceived Quality, Customer Engagement, and Satisfaction in Supermarkets of Ecuador
- 1817: Inventory Management System for the case study of a Cement Distributor
- 1853: Revolutionizing Supply Chains: Unleashing Reconfigurability and Flexibility through Industry 4.0 Integration
- 1857: Potential of Artificial Intelligence in the Restaurant Industry of Honduras: Perspectives from Users and Operators
- 1872: Corruption of officials and public works bidding in Peru
- 1878: Development of Transversal Competences: The Case of Health Institutions, Chile
- 1885: Facial biometrics and emotions, What types of Facebook posts awaken users' emotions?
- 1892: Administrative management and its relationship to administrative staff turnover: a case study in an Ecuadorian public institution
- 1897: Improving Productivity through the Design of a quality management system based on the ISO 22000:2018 standard
- 1999: Efficient model of cluster analysis as a segmentation strategy: inductive social responsibility of technological innovation in MYPES
- 2000: Simplified protocol for the segmentation strategy in MYPES: marketing as a predictor of technological innovation. A cluster analysis

Environmental Engineering
- 140: Treatment of wastewater from a municipal slaughterhouse in the city of Tacna-Peru using an Upflow Anaerobic Sludge Blanket Reactor
- 192: Urban heat island and increase in temperature on urban roads in Huancayo/Peru
- 235: Solar energy and weather conditions in the Caribbean
- 261: Sustainable digital business management: Challenges and opportunities.
- 286: Application of allometric equations for the sale of carbon credits from the reforestation of Cerro Piñujo, Huarmaca district in Peru
- 287: Preliminary Study of Solar Photovoltaic Potential During the Rainy Season in Villanueva, Honduras
- 291: Post-Pandemic Air Quality Assessment in the District of San Borja
- 298: Superficial urban heat island in the metropolitan area of Grande Vitoria/Brazil
- 305: Estimating Factors that Influence the Generation of the PM2.5 Contaminant in Temuco and Padre Las Casas, Chile
- 320: Removal of Chromium and Arsenic by Electrocoagulation in Waters at Neutral pH
- 376: Influence of the Inadequate Disposal of Solid Waste from the Rumiallana Dump on Soil Quality.
- 378: Preliminary results of the use of Purple Cabbage as fuel for the generation of electrical energy.
- 387: Efficiency of different types of livestock manure and substrates in biogas production
- 388: Environmental awareness and the conservation of green areas in the citizens of the district of San Juan de Lurigancho
- 389: Environmental Awareness and Solid Waste Management in Secondary School Students
- 391: Impact of the use of fertilizers on agricultural soils. A systematic review of the scientific literature
- 433: Interculturality and discrimination in high school students of a public institution 2023
- 442: Reuse of solid organic waste to produce biogas and compost as a circular economy process in an underground mining unit
- 454: Solid Waste Flux in Higher Education Institutions: A Systematic Review on Modeling Approaches
- 467: Application of bacteria for the bioremediation of soils contaminated with hydrocarbons: a review of the scientific literature
- 539: Challenges and Perspectives in the Implementation of CRM in SMEs: A Case Method Approach in the Peruvian Context
- 541: Environmental Awareness and Responsible Consumption in University Students
- 583: Solid waste collection route proposal using ArcGIS Network Analyst in the town of Huaycán in the Ate district, 2023.
- 588: Ergonomic improvement using the Rula method to reduce occupational diseases in heavy load transportation Lurigancho Chosica, 2023.
- 713: Technical efficiency for the treatment of domestic wastewater applying artificial wetland, Lima, 2023
- 719: EVALUATION OF THE ENVIRONMENTAL RISK GENERATED BY THE OIL SPILL ON THE COASTAL MARINE COAST OF VENTANILLA - CALLAO, 2022
- 744: Influence of fruity Biol and Biofish on the vegetative development phase of lettuce Lactuca sativa L. in home garden conditions
- 750: Influence of Halophilic Bacteria on the Recovery of Saline Soils
- 845: Performance assessment of Cyperus alternifolius and Chrysopogon zizanioides in greywater treatment with artificial wetland
- 869: Microclimate Modeling Approach with in-situ Validation: Case of a University Campus in a Tropical Climate
- 888: Incorporation of alcoholic extract of mango peel on mango seed starch-based bioactive compounds
- 1101: Use of the fungus Pleurotus ostreatus in triticum straw and Zea mays crown substrates to bioremediate soils contaminated with cadmium
- 1107: Quantification and characterization of atmospheric microplastics in a coastal urban area of the city of Lima, Peru
- 1240: Opuntia ficus-indica for the removal of organic matter and turbidity from wastewater from the “La Colonial” meat processing plant
- 1242: Bibliometric Analysis on the Use of Microorganism-Based Biofertilizers for the Growth and Yield of Agricultural Crops
- 1306: DEVELOPMENT OF METHODOLOGY FOR THE ANALYSIS OF WATER QUALITY IN RIVERS
- 1312: Bibliometric Analysis of the Use of Electric Vehicles as a Carbon Footprint Reduction Alternative
- 1406: Optimized Off-grid Solar PV System with Energy Storage for Rural Residence: Techno-economic Analysis in San Francisco de Yojoa, Cortés.
- 1430: Intelligent system generator of numerical derivation exercises with gamification
- 1531: Elements for a methodology for analyzing the social impact of technological development and transfer in HEIs of LAC
- 1537: Tangerine waste and pH variation to improve bioelectricity generation in microbial fuel cells
- 1538: Tomato waste with potential use as an alternative in the generation of bioelectricity
- 1562: Territorial strategy for climate change adaptation and mitigation in the municipality of Tona, Santander, Colombia.
- 1600: Exploring Computational Fluid Dynamics Models for estimating pedestrian exposure to traffic related air pollution: A bibliometric review and critical analysis
- 1618: Effects of Quarry and Recycled Concrete Waste as Rapid Use Stabilizers for Clay Soils
- 1638: Air Quality due to PM2.5 and PM10 Emissions in the Santa Luisa Housing Development, San Martín de Porres District, 2023
- 1640: Relationship between the economic valuation of noise by contingent method and noise levels in the Carabayllo district
- 1690: Application of the SOAR Analysis in University Strategic Planning, transition from SWOT Analysis.
- 1735: Energy Efficiency in Pipelines: A Comparative-Applicative Analysis of Predictive Models for Drag Reducing Agents (DRA)
- 1770: In situ Net Electricity Balance Analysis at Different Time Spans: Case of an Existing Residential Building in Tropical Climate
- 1773: Determination of the water quality of the Chancay-Baños river using aquatic macroinvertebrates.
- 1811: Correlation of climate variation and NDVI values using Landsat scenes in the Amazonian penillanura of Yurimaguas - Peru, 1984-2023.
- 1828: Climate variation in the Amazonian peneplain due to deforestation and urban expansion in Iquitos - Peru, between 1984 and 2023
- 1874: Preliminary assessment of the drinking water consumption at the residential level in the province of Panamá and Panamá Oeste
- 1880: Evaluation of the impact of urban expansion and hyperconcentrated flow generation in a dry creek

Logistics and Transportation
- 131: Importance of logistics and supply chain in health services: literature review
- 162: Distribution Management in a Peruvian Wholesale SME by minimizing Product Returns: A Case Study
- 206: Proposal of Routes with Capacity Constraints for UNITEC Tegucigalpa through Linear Programming
- 240: Diversification of Markets and Enterprises in the Exportation of Peruvian Blueberries
- 259: Study for the Optimal Location of Bitcoin Automatic Teller Machines (BTM) through Operations Research
- 272: Improvement in the Productivity of a Logistics Operator Through Lean Manufacturing
- 307: Análisis de estrategias de mejora en el proceso logístico de un centro de distribución de productos de consumo masivo
- 331: Inventory Control and Warehouse Management of a Transportation Company, Trujillo, 2023
- 347: A Heuristic Approach to the Household Waste Collection Problem
- 362: Identification and prioritization of enablers for agile supply chains in Peruvian SMEs, a quantitative approach.
- 410: Best Practices of competitiveness and innovation in Global Value Chains Review: An approach to achieving global development goals. SDGs.
- 597: Trust and its Role in Achieving Knowledge Fertility and Corporate Unity
- 600: Organisational Strategy and Size in A Technical Vocational Training Centre in Peru
- 694: Application of artificial intelligence and object detection for the determination of defects in flexible pavement
- 760: Logistics Management and Efficiency at Concesión Minera Esperanzas, Cerro de Pasco - Peru
- 875: Behavior of energy multinationals and the fight against environmental pollution in Latin America during the period 2011-2022
- 939: Influence of Geometry on Accident Risk Levels. Application of the Predictive HSM Method on a Rural Road in Perú
- 964: Influence of Permeable Rigid Pavement on Vehicle Skid Resistance in Curved Sections of a Roadway
- 1010: Improving the distribution of food aid to soup kitchens in a locality of Lima. A localization and routing approach
- 1059: QUALITY OF SERVICE AND CUSTOMER SATISFACTION OF THE CARGO COMPANY TRANSPORTE PAKATNAMU SAC. 2023
- 1075: Impact of Slotting on the Supply Chain for Warehouse Management: A Systematic Review
- 1150: Implementation of the genetic algorithm for optimization of garbage collection considering the load-dependent cost
- 1164: Optimizing Nanostore Performance in Honduras: Interplay of Total Quality Management, Adaptability, and Reconfigurability
- 1166: Cost and time reduction in the evaluation of functional failures in flexible pavements through photographic imaging and PCI methodology
- 1223: Optimization of the Design of Cycle Networks: Application in the City of Rio de Janeiro
- 1249: The industrial location and the growth of the automotive industry: A systematic literature review
- 1266: Magnetic Levitation in trains: a systematic literature review from 2018 to 2023
- 1337: Supply Chain Management in the Productivity of Construction Industry Companies: A Review of Scientific Literature
- 1384: Impact of business constraints during the COVID-19 pandemic on the profitability of Automotores de la Amazonia SAC: A detailed analysis
- 1530: Forecasting Models Using Deep Learning Algorithms by Means of Recurrent Neural Networks LSTM to Estimate Demand of Building Making Materials
- 1616: Nanostores and Society 5.0: Paradigm Shifts in Supply Chains through Bibliometric Analysis
- 1626: Influence of the introduction of electric vehicles on CO2 emissions in Peru
- 1656: Trends and challenges in logistics for cross-border e-commerce: A bibliometric overview
- 1724: Design of a dynamic tool to improve inventory control and classification.
- 1836: Polluting emissions emitted by public transport vehicles based on the Simplified Emissions Estimation Model, city of Chimbote - Peru

Management of Engineering Education
- 132: Master’s final projects as an approach to sustainable development of local communities: Experiences from the electrical engineering program at Universidad Politecnica Salesiana Guayaquil
- 158: The use of AI tools to create STEM presentations: a comparative study.
- 180: Producción científica en ingeniería de las universidades dominicanas. Estudio preliminar en Scopus
- 200: Initial Exploration of ChatGPT Usage in a Computer Science I Course
- 220: Motivation for Critical Thinking: A Comparison of Engineering and other Faculty Undergraduate Students in Chile
- 251: Improvement of Productivity in a Timber Company through Standardization and SMED Tools with a Lean Approach
- 268: Application of Computer Resources in Learning Systems of Linear Equations for Students of Engineering of the Alas Peruanas University Puno.
- 271: Prospective Analysis, AHP, Causal Loop Diagram and Montecarlo Simulation to reduce costs of a metal-mechanic company.
- 277: Conflict management in the UNAC Engineering faculties, year 2023
- 293: Innovation in Project Management: Using the PMBOK 7th Edition in Industrial Warehouse Construction
- 299: Analysis and simulation of the mathematical model love dynamics through autonomous system of ordinary differential equations
- 310: Main Variables in Teaching Quality: A Data Mining Approach
- 311: Optimizing Production in the Packaging Process of a Dressing and Ground Company through the Lean Approach
- 315: Exploring the link: Investigative Competencies and Management Skills in Engineering Students
- 325: Process optimization and identification of defective products with ProModel software in the production of “J&N E.I.R.L” compactbono
- 326: Plant layout design using the ProModel program to optimize spaces and minimize times in a retreading company in Cajamarca
- 328: Research skills in teacher training. A systematic review from 2015 to 2023
- 337: Bank size and type impact on efficiency: Evidence from Ecuador
- 349: Improvement of productivity by applying Poka Yoke, SMED and TPM in a SME in the brick production sector
- 350: Improvement Design to Increase Productivity by Applying Poka Yoke, VSM and SMED in a Plastic Company
- 351: Improvement model for inventory management applying ABC Classification, EOQ and ROP in a tire retailing company
- 411: Enhancing Mathematics Education in Engineering Schools: Didactic Strategies for Effective Development
- 425: Experimental investigation of an ecological concrete developed with calcareous silica brick and basalt fibers for the reduction of CDW
- 455: Analysis of the Comparative Advantage in the Export of Copper Minerals from Peru to China 2010 to 2022
- 469: DIGITAL MARKETING AND CONSUMER PURCHASE DECISION OF THE COMPANY REPOSTERIA DEL NORTE SAC
- 471: Quality of educational service and loyalty of pre-university students at Maxwell Academy, Otuzco, 2023
- 481: Some trends on artificial intelligence in legal education
- 497: Study habits and academic performance of students belonging to the virtual campus of a Peruvian university
- 503: Evaluation of Mechanical Risks in the Production Area of a Polypropylene Sack Production Company
- 523: Reverse Logistic strategies for a Sustainable Textile industry: A systematic review
- 550: Analysis of the Efficiency of Tiflotechnology Tools Implemented in Educational Centers: A Systematic Review
- 558: Application of ergonomic methods in SMEs for productivity improvement. A systematic review
- 561: Systematic literature review of the sources of contamination in printing processes in the printing industry.
- 567: Design of a triage chatbot to rule out respiratory diseases: Systematic review.
- 577: Implementation of reliability-centered maintenance (RCM) to improve the availability of CL120 Freightliner tractors in J&J Transportes y Soluciones Integrales Inc.
- 578: Brand loyalty and web service quality in a retail shoe store E-Commerce: An empirical exploration of the peruvian digital consumer
- 584: BlockEP: A Blockchain Architecture to Record Academic Grades in the Peruvian Army
- 599: Hyperrealistic facial expression generation application and its impact on the treatment of people suffering from Alexithymia
- 601: Current trends in digitalization for the improvement of logistics processes of manufacturing companies in Latin America during 2019 to 2022
- 604: Predictive model of academic performance and learning based on methodological strategies in a Peruvian public university.
- 616: Research trends in universities applying technological surveillance.
- 618: Impact of augmented reality on the learning of primary school students A Systematic Review
- 625: Citizen alert: mobile application and response to situations of vulnerability in northern Peru
- 633: Ergonomic Risks Based on the ROSA Method for Reducing Musculoskeletal Disorders in Office Environments: A Systematic Review
- 637: Sustainable waste: mobile application in the efficient management of urban waste in northern Peru
- 700: Last-mile logistics: Analysis of retail sector in Lima Metropolitana during the COVID-19 pandemic
- 743: Enhancing Engineering Competencies through Sustainable Design: A Project- and Problem-Based Learning Approach for Industrial Engineering Students
- 767: Bentonite Clay as a Coadjuvant with Aluminum Sulfate for the Reduction of Physicochemical Parameters in Wastewater from the Textile Industry
- 786: Argumentation dimension of quantitative reasoning and cooperative learning
- 801: Proposal for the Improvement of Environmental Management for the Reduction of Costs of the Company Transporte Amador Express S.A.C.
- 863: Efficiency of Public Investment in Peru and Proposals for Its Improvement
- 864: Improving Production Processes in the Metalworking Industry Through the Implementation of Lean and Six Sigma Tools: A Systematic Literature Review
- 874: The impact of Lean Manufacturing tools in the Supply Chain: A systematic review
- 879: Implementation of emerging technologies in companies in the manufacturing sector: A systematic review of the literature 2018 – 2023
- 889: Proposal of a Method for University Strategic Planning based on the Balanced Scorecard and the EFQM 2020 Model
- 920: Optimization of the Exploitation of the Rock Mass to Increase Productivity Through Mining Planning in CMPSA
- 943: Accreditation: Evaluating research standards in Peruvian universities
- 973: Lean Manufanturing in warehouse management to reduce costs in a testing laboratory
- 980: Evaluation of risks produced by high noise exposure levels of workers in the industrial washing area.
- 982: Impact of Implementing Food Safety and Quality Management Systems 2018 - 2023. A systematic literature review.
- 986: Achievement motivation and self-regulation of learning in university students
- 991: Academic self-efficacy and self-regulation of learning in university students
- 994: Review of the Implementation of the Kanban Methodology to Optimize Inventory and Supply Chain in a Retail Store
- 999: IoT and new technologies to improve Smart Parking efficiency: Systematic Review.
- 1004: Exploring the Intersection of Artificial Intelligence and Neuroscience: Heuristics for the Inference of Emotional Signals through Brain-Computer Interfaces
- 1005: Exploration of a Learning Outcomes Evaluation Model for the Engineering Faculty of the University of La Guajira.
- 1006: The current profile of the engineer based on the evolution of his professional skills
- 1012: Influence of preventive maintenance on the productivity of a metalworking company
- 1024: Laboratory Program to develop Critical-Technological Capacity in mechatronic engineering students from a university in Lima
- 1035: Ergonomic Risks Factors in industries: a systematic review 2018 - 2023
- 1042: Inequalities in learning performance caused by the digital divide during the health emergency
- 1047: The Importance of -TRF- terms of reference in the Procurement of Goods and Merchandise in organizations.
- 1057: Sustainable Lean & Green 4.0 production: a bibliometric analysis
- 1069: Systematic Review on how Technological Innovation Can Improve the Cocoa Industry
- 1082: Systematic Review of the Impact of Lean Six Sigma on Sustainability Practices in a Practical Approach in the Food Industry
- 1095: Academic stress in students of the Faculty of Engineering at a Honduran university.
- 1108: Application of the agile SCRUM methodology for project management in engineering degrees
- 1117: Methodology for Relating the Cost of Employee Turnover, Employee Retention, and Lost Production Costs
- 1119: Supply chain management in the retail store: Systematic literature review.
- 1141: Application of business intelligence as a strategy for decision-making in the sales area of SMEs
- 1147: Integration of the SCRUM Methodology in Mathematics Teaching and Learning
- 1156: Mathematical model for the vehicle routing problem with pick-up and delivery of packages using electronic Lockers
- 1160: Newton's Method: A Nonlinear Optimization Study
- 1170: Model to improve efficiency in the Maintenance area using Lean Manufacturing tools in a Fishing Sector company
- 1180: A comprehensive evaluation of methods for the removal of pharmaceutical contaminants in wastewater: A systematic review of the literature
- 1196: Models for R+D+i+e interaction between the university and its context. A Literature Review
- 1224: Occupational Health and Safety Management System to reduce Accidents in a Contractor Company in the Mining Sector in Peru
- 1243: Static and fatigue evaluation of the VOLVO EC460 excavator bucket using the finite element method
- 1250: Exploring Variations in Post-Pandemic Academic Performance Case: Faculty of Engineering and Business School of the Universidad Tecnológica de Bolívar
- 1253: Methodological proposal for a volunteer program with a social responsibility approach at a public university in Peru
- 1258: Analysis of preventive maintenance in 980 E-5 mining trucks and its relationship with mechanical availability
- 1280: Design of event management software for entrepreneurs applying heuristic principles and user experience
- 1334: Proposal to Characterize the Effectiveness of Engineering Education in Colombia
- 1338: Application of Lean Manufacturing and its impact on the productivity of a plastic bag washing company
- 1390: Design of a Strategic Plan for a Family-owned Construction Company
- 1433: Knowledge management and its importance in strengthening organizational results and business competitiveness: literary review
- 1438: STEAM model: Educational experience of students in the construction of an alternative masonry prototype.
- 1447: From traditional maintenance management to total productive maintenance: application case in agribusiness
- 1461: A Systematic Review of the Lean Model Manufacturing in the Supply Chain of the Metal-Mechanical Companies
- 1467: Autonomous learning in Covid 19 season: A look at the Faculty of Systems Engineering of a private university in Lima
- 1474: Anxiety about scientific research in accounting master students
- 1477: Use of humor in the virtual classroom: characterization of teacher perspectives
- 1478: Integration of Lean-BIM Methodologies in Construction Projects: A Systematic Review
- 1492: Importance of Good Project Management Practices in NGOs, according to PMI (Project Management Institute)
- 1497: Key factors that influence the integrated management of portfolios, programs and projects in organizations
- 1549: Coaching in Human Talent Management in university professors of the Faculty of Engineering
- 1565: Learning mathematics online, a comprehensive task: systematic review of the literature over the past 4 years
- 1572: Automated Court Decision Platform in Ecuador: Advancing Judicial Processes through Information and Communication Technologies
- 1578: The mediation of interactivity and Tutor support in affective support in University Students
- 1583: Cloverleaf Model for Efficiency Improvement Through the Application of Lean Tools in a Metalworking SMEs
- 1596: Learning experience using PBL through integrative work
- 1598: A Study of the Construction of the Notion of Parabola in Engineering Students
- 1609: Reengineering in STEAM: Rehabilitation of a C3Tec Permanent Exhibition
- 1611: APPLICATION OF THE BIM METHODOLOGY IN THE CONSTRUCTION PLANNING OF THE UNEMI POSTGRADUATE BUILDING
- 1634: Evolution and trends in digital skills and graduate employability: Bibliometric analysis.
- 1645: Professor's attitude to the use of ICT and interaction with university students
- 1646: Proposal of lean manufacturing in the fertilizers warehouse of a grape agroexport company
- 1649: Attitude towards the use of ICT and professor's performance in the classroom
- 1658: Relevance of collaborative work in university education during the digital age
- 1675: Principal Management Leadership in Early Education: A Systematic Literature Review on Scopus
- 1676: Improvement of the supply chain of a restaurantn in Lima through the synergies of Lean manufacturing and system dynamics tools
- 1677: Scholarship of Teaching and Learning (SoTL) as a complementary outcomes assessment strategy: Case study on unit conversions, including test creation
- 1689: University institutional capacities in a certification network of technical specialties
- 1706: The implementation of Manufacturing Cells in the industrial setting in Latin America: a systematic review of the literature
- 1727: Review: Development of research competencies in university students
- 1730: Work communication strategies and resolution in the sports sector – Cajamarca, 2023.
- 1748: Enhancing grocery store profits via improved inventory management using ABC classification and FIFO methodology for efficient storage
- 1755: Forecast demand in a pharmaceutical trading company using ABC classification, Holt Winters method and ERP for an efficient business model.
- 1759: The management of entrepreneurial competencies in students of Higher Education Institutions in Latin America. A systematic review between 2019 - 2023.
- 1761: Lean Innovation Canvas: A Business Model to Drive the Growth of SMEs through a Mobile Delivery Application in Jaen, Peru
- 1774: PROFESSIONAL ETHICS AND WORK PERFORMANCE IN PUBLIC INSTITUTION OF PIURA – PERU 2023
- 1784: Integrating Qualitative Analysis as a Primary Phase in Engineering Scientific Research Instrumentation Development
- 1796: Management model based on prescription audit, ABC classification method and Kaizen to improve pharmaceutical service level
- 1802: Warehouse management model integrating 5S methodology and ABC classification to optimize space utilization and search time in a commercial SME
- 1805: Storage management model based on Lean Warehouse Management and Systematic Layout Planning
- 1809: Towards Efficient Water Bottling Operations: A Continuous Improvement Analysis and Deep Learning-Driven Master Production Scheduler
- 1819: Pharmacomathematics: Charting the Road to Health; The Fundamental Role of Mathematics in the Health Sciences
- 1831: Impact of Knowledge in Linear Algebra on Academic Performance in Quantitative Optimization Methods: A Data Analytical Approach
- 1837: Critical factors that influence the turnover intention of workers in the company Reforestadora Amazónica S.A. operations area
- 1844: Benefits and Challenges Experienced by Students in Theoretical Engineering Program Courses in a Virtual Modality During the COVID-19 period
- 1845: Improvement plan to reduce costs in a balanced food company, Trujillo, 2023
- 1855: Mathematical model for fleet sizing using the match factor in an open-pit mine
- 1862: Effectiveness of Lean Manufacturing and Six Sigma in Process Optimization in SMEs: A Systematic Literature Review (2018-2023)
- 1877: Dynamic support evaluation to mitigate rock bursting in underground mines in central Peru.
- 1883: Implementation of productivity improvements in gold chains through the PDCA and 5S cycles in a jewelry company in Peru
- 1886: Ergonomic risks in university engineering students during the pandemic
- 1893: Integration of Technology into Traditional Crafts to Foster Sustainable Development and Digital Education in Libertador Bolívar Commune, Santa Elena, Ecuador
- 1896: Motivating Factors and Their Relationship with Academic Performance in English Speaking Among Students of a Public University in Peru, 2023
- 1904: Sociodemographic factors associated with attitude towards mathematics in students of a Peruvian Public University
- 1906: Socially responsible behavior in university graduates
- 1907: Analysis of the production of intellectual property at the National University of Callao through its patents, utility models and inventions
- 1919: Factors that affect the publication of articles by engineering professors from a private university in Peru.
- 1923: Overview of Particle Accelerator Physics in South America: A Systematic Review of Regional Contribution and Collaboration Networks
- 1927: Development of Communication Skills in a Capstone Project Course
- 1930: Overall Equipment Efficiency in the Manufacturing Industry: A Systematic Review
- 1931: Learning process in virtual classrooms and its relationship with relationship with the satisfaction of the students
- 2016: Benefits and difficulties experienced by students in engineering subjects in virtual mode during the period 2020-2022 (COVID-19).
- 2027: Citizen commitment development through undergraduate internships at the UNPADE-Magallanes.

Mathematics & Physics
- 398: The Sky’s the limit: - using CanSats for Immersive Engineering Education on the REEdI Project
- 1368: MATHEMATICAL MODELS FOR PLANNING COMBAT STRATEGY AND DECISION MAKING
- 1370: Improving the recovery factor of heavy oilfields of Marañón Basin by using new completion and EOR technologies
- 1789: Identities of incomplete elliptic integrals with application in electromagnetism

Poster Student
- 130: Assessment of Compressive, Flexural, Tensile Strength of Concrete with Replacement of Fine Aggregate by PET Fiber and Nano Silica
- 1362: Cryptocurrencies, special case of blockchain application: A literature review
- 1494: Digital Innovation: A Blessing And A Curse?
- 1708: MULTIMODAL LEARNING OF ACADEMIC DRAWING AND DESCRIPTIVE GEOMETRY: ADDRESSING CHALLENGES IN ART EDUCATION
- 1951: Our energy by kids
- 1953: Bamboo Cellulose Biopolymeric Films with Potential Applications in Agriculture
- 1955: Design of a tracking bracelet for high-risk explorations in remote areas of Colombia
- 1959: Connecting bike path implementing a design based on the existing restrictions on the ground
- 1962: Web Lab Platform for Remote Management of Engineering Laboratories: Development and Implementation
- 1967: Empowering Minds and Unleashing Curiosity: DIY Biotechnology for High School Students in the Age of Distance Learning
- 1969: Artificial Intelligence and asset management in Industry 4.0
- 1971: Electroencephalography as an alternative to Electromyography prosthesis control, a scientific Review.
- 1972: Comparative Analysis of an Activated Sludge and a Trickling Filter Wastewater Treatment Plant
- 1977: Exploration of the environmental impact of a laundry service in Arequipa through life cycle assesment
- 1978: Exoskeleton for hand rehabilitation in rheumatoid arthritis
- 1980: Prototype of Psychological Assistance Robot for Patients in Palliative Care
- 1981: Development and Implementation of a Balancing Robot Simulating the Behavior of an Inverted Pendulum
- 1982: Development of an Electrooculography Method for Eye Movement Analysis: Insights into Eye Signal Processing Techniques
- 1983: Persistent identifiers as a solution to the visibility and persistence of research resources
- 1986: Comparison of Facial Recognition Methodologies for Detection of Drowsiness and Cell Phone Usage in Drivers: Adaptation and Evaluation
- 2004: Exploring the Thermal Stability and Durability of Polymer-Based Materials: A Comprehensive Analysis of Plastic Bag Lifespan
- 2010: Ammonia Leak Through Large Eddy Simulation Models in 3D Geometrically Dense Environments (FINAL)
- 2012: AirSense: Air Quality Monitoring with Arduino
- 2015: Digital marketing and customer acquisition in an advisory and consulting company, San Martín region – 2023
- 2018: Motivación y procrastinación laboral en trabajadores de una municipalidad distrital, región La Libertad - Perú, 2023
- 2021: Assessing the Influence of Education on College Students after the COVID-19 Pandemic
- 2024: Empowering Underrepresented Undergraduates in Computing By Bridging the Digital Divide in Marginalized Communities
- 2025: Modeling for a Water Reservoir System
- 2029: The Output State of a Quantum Computer
- 2033: Secure VPN Implementation on Ubuntu Using OpenVPN to Establish Private Connectivity
- 2034: Enhancing Network Security with Raspberry PI 4: Leveraging Pi-Hole and Wireshark

Student Paper - SP
- 385: Optimization of precast slab loading in prefabrication by applying Tekla's Stacker and Organizer tool in the multifamily housing project sector
- 915: SARA: Environmental Collection and Cleaning System
- 1968: Simulation and Modeling of Control and Sensorization Strategies for Autonomous Navigation with Differential Drive Robots: Unknown Environments Focused Approach
- 1974: Integration of Image Processing and 3D Printing for Enhanced Intracranial Malformation Detection and Surgical Planning
- 1976: Economic valuation related to public health due to the contamination of particulate matter less than 10 microns in Arequipa, Peru
- 1979: Optimization of design a modular and intelligent system for the utilization of biodegradable household waste
- 1984: Soil Sampling and Analysis Robot S.S.A.R.
- 1985: State-space control applied to the balance of a linear inverted pendulum
- 2009: Cleaner and Sustainable Production in the Industry: A Literature Review
- 2011: Naturalness and Interpretability of Graphical Representations of Fuzzy Numbers
- 2019: Powering a Microcontroller with Ambient Energy to Track the Local Weather
- 2022: Thermal comfort of an adobe house in the high Andean area: case study's the houses in the Pampa Quehuar - Peru
- 2047: Employment Outcomes Following Industrial Attachment in Kenya

Sustainable Development
- 194: effects of the lack of an engineering vision in municipal public management: a view from the sustainable development goals
- 339: Investment, as a tool to achieve growth and the eradication of poverty, can be undermined by inappropriate decisions and policies.
- 403: Influence of Climate Factors on Huayhuash Glacier Cover Changes, 1988-2022, Ancash
- 434: Estimation of carbon dioxide potential stored in the aerial biomass of the Chaviña wetlands, Arequipa, Peru
- 445: Identification of tardigrades from the Half Moon Island, Antarctic.
- 608: Three-Dimensional Accounting Approach and its Impact on the Measurement of Business Sustainability in Piuran Production Chains.
- 640: Retrofitting Approaches for Office Buildings in Tropical Climates: A Systematic Review
- 795: CHIMBOTE IN DANGER: THE SILENT IMPACT OF POLLUTION AND THE POWER OF COMMUNITY ACTION.
- 822: Journey to upcycling: Understanding consumer’s behavior regarding clothing disposal in Lima Centro, Peru
- 968: Sustainability in Chemical Recycling of Polyolefins: A Comprehensive Approach to the Plastics Industry
- 1036: Analysis of Reinforced Concrete Beams with Steel and Bamboo Reinforcement, San Pedro Sula 2023
- 1051: Noise: perception its effects on cognitive skills in elementary school students.
- 1052: New packaging strategies to enhance food safety: a systematic review
- 1056: Bioplastic packaging: a systematic review on its sustainable performance and applications
- 1105: DESIGN OF BRIQUETTES AS A SUSTAINABLE ALTERNATIVE TO FIREWOOD IN SAN PEDRO SULA, HONDURAS 2023.
- 1115: Use of African Palm Digestate and Banana Peel Digestate as Fertilizer in Agricultural Soils
- 1288: Impact of droughts and El Niño Costero on dry forest and white-tailed deer in Coto de Caza El Angolo - Perú
- 1325: Ethical banking and SDGs: A mixed review of the literature
- 1401: Exploring the Road to Sustainable Tourism: Colombia and Honduras, Potential Destinations
- 1550: Meta-analysis of Energy Efficiency in Educational Buildings
- 1585: Convergence of the Aesthetic in Social Housing and its Effect on Urban Development, in Ica and Lima, 2023
- 1606: Foreign investment in the fishing sector after the Free Trade Agreement between Peru and China, 2009-2021
- 1688: Corporate social responsibility and greenwashing in a banana exporting company
- 1827: Thermal comfort analysis of dwellings without air conditioning systems in hot-dry climates
- 1910: Effect of partial substitution of wheat flour with okara flour in the elaboration of panettone
- 1915: Remediation methods and environmental risks from oil spills into the ocean: A systematic review
- 1929: Evaluation of rehydration of chickpeas (Cicer arietinum) in hard water
- 1952: Evaluation of the hygienic quality and service of the gastronomic offer in a coastal tourist destination
- 1954: Design and Simulation of Integrated Distributed Energy Resources onto the Island of Saint Lucia
- 1964: Review of waste-to-energy generation technologies from urban solid waste in Costa Rica
- 1994: Autoconstrucción indígena y arquitectura bioclimática. Nacionalidad Quichua-Andino pueblo Saraguro. Ilincho-Loja-Ecuador
- 2042: Service learning for social inclusion and the fight against fuel poverty

Telecommunications, IoT, and Industry 4.0
- 156: Urban Signal Propagation Study Using Ray Tracing Methods in Tegucigalpa, Honduras
- 666: Cybersecurity, State, and Law: A look from the scientific literature
- 802: Development and implementation of an itinerant satellite Internet access station for the Inca Trail in Cusco-Machu Picchu - Perú
- 810: Design and initial implementation of telehealth and rural telemedicine services for deployment in Rio Santiago Network, Condorcanqui - Amazonas, Peru
- 1050: Analysis of the Security Impact of Electronic Commerce on SMEs: A Systematic Review of the Literature
- 1103: Development and impact of Business Intelligence Systems (BIS) in retail decision-making processes: A systematic review
- 1151: Web interface with RPA for review of Exams for the Algorithms and Data Structures course in C++ Code
- 1329: Utilization of CAAT in Continuous Auditing: A Case Applied to the Ministry of Health, Peru 2022-2023
- 1417: Development of a Telemetric Watershed Monitoring Station
- 1466: Implementation of SDWAN technology over legacy networks for the optimization of packet traffic using CDTA(control of delay and traffic analyzer)
- 1510: HACCP Administrative System in Food Services: A Review of Dimensions Over the Time Period 2018 to 2022
- 1599: IoT prototypes based on LPWAN networks for geolocation and security for the Smart Campus Zacatenco
- 1620: Technology Integration and Innovation in Nanostores: A Moderation Analysis of Industry 4.0 on New Product Development and Performance Outcomes

Women and Diversity in Engineering
- 279: Empowerment and ICT in University Female Students of Lambayeque, Peru: A Comparative Sociodemographic Analysis
- 379: Achievement Motivation and Entrepreneurial Intention in the Northern Macro Region of Peru: The Moderating Role of Gender
- 394: Impact of familial, sociocultural factors, entrepreneurship barriers, and intrinsic motivation on the entrepreneurial attitude of engineering students.
- 537: Exploring Career Selection in Computing: A Case Study Examining the Experiences of Women Across Different Age Groups in Costa Rica
- 935: Computational Thinking the High School Level as a Strategy to Stimulate Female Vocational Interest in Engineering Careers.
- 1094: Exploring gender dynamics in collaborative learning in engineering education: Preliminary analysis of women students' experiences in Ireland
- 1194: Discrimination by sex: a case study of the differences in performance between in-person and virtual modality
- 1728: An approach to the profile of women engineers qualified as researchers in Peru
- 1742: Transforming the Industrial Organization subject program with a gender perspective
- 1790: Design and implementation of an interactive crib to monitor and control the baby's well-being
- 1888: Examining the Influence of Gender Equity Initiatives on STEM Student Demographics
- 1987: Exploring gender perceptions and intellectual self-confidence towards the work environment: a comparative analysis

Work in Progress
- 106: Competitive Intensity in the Automotive Parts Sector in Northern Peru: Case Repuestos Mendoza
- 107: Impact of trade openness on the agro-export sector in the La Libertad region, Peru
- 182: Study on the Treatment Coverage of Wastewater and Wastewater Sludge in the Province of Santiago, Dominican Republic
- 190: Applications of Homotopy Theory in Calculus of the Fundamental Group of the sphere and in Engineering
- 191: Leibniz's Rule and its application in differential equations
- 195: Exploring the Intersection of Innovative Strategies: Effects of Integrating Virtual Simulators and Self-regulation on Scientific Reasoning.
- 217: Dosimetry Optimization in Digital Mammography: A Integral approximation through X - ray Tube Performance Evaluation
- 225: Endomarketing, felicidad, talento una cuestion de recursividad en America latina: Revisión de literatura 2018-2023
- 256: Industrialization for the neutrality of carbon emissions in sustainable buildings
- 274: Effect of Age on the Mean Glandular Dose and its Implications in the Detection of Breast Diseases
- 390: Riesgos inherentes a la transformación empresarial: perspectiva de innovación disruptiva en los países latinoamericanos
- 440: Numerical approximations of the solution of the delay differential equation for population analysis
- 462: Evaluation of the factors that contribute to water stress in Peru, 2008 – 2022
- 478: Didactic applications of the Gamma and Beta Function in Analysis, Physics and Statistics
- 534: Analysis of Wind Measurements for Energy Potential Studies from Data from an Experimental Station
- 538: Counterspaces for Women in Costa Rica: Case of study of CIDeV Game Jam
- 620: The Impact of Information Technology Devices and Functionalities on the Productivity of Service Firms
- 622: The impact of investment in Information Technologies on Productivity and innovative profitability in the long term
- 646: EDUCATIONAL ROBOT AIMED AT IMPROVING THE ACADEMIC PERFORMANCE OF PRIMARY STUDENTS
- 677: Proposal for an energy storage system as a backup for a renewable generation system for a university campus
- 739: Generator and classifier of the flicker phenomenon that affects power quality
- 742: Impact of digital transformation on process management in the nutrition and dietetics area of a peruvian hospital
- 756: Planning and management in software quality, a review study
- 771: Model for Designing an Improvement Project Management Process in the Food Production Unit of a Drive-Thru Coffee Company
- 835: Desarrollo de un sistema de supervisión y control para un generador electroquímico de hipoclorito de sodio in-situ
- 910: Export Dynamics of Ecuadorian Pineapple: Boosting Competitiveness through Innovation. A regional Approach
- 945: Integrating Cybersecurity Measures into Smart Grid Design: Enhancing Resilience and Protecting Critical Infrastructure
- 967: Currículo Visible e Invisible para el impulso a la innovación y la formación de competencias transversales en estudiantes de Ingeniería
- 974: Comparative Analysis of Internationalization and Challenges in the Export of Ecuadorian Passion Fruit to Europe: A Regional Approach
- 979: Regional Dynamics in the Competitiveness of Ecuadorian Mango: A Comparative Approach with Other Producers
- 1002: Estimated fuel consumption for a vehicle with manual transmission in the highways in the city of Lima
- 1111: A methodological proposal through the comparison of methodologies for the implementation of innovation projects
- 1188: Work in progress: reviewing measurement properties of wearables in computing ball kicking features
- 1294: Logistic regression and artificial neural network models in cervical cancer
- 1308: Influence of the Application of the Master Production Schedule (MPS) in a textile company in Lima – Peru, 2023
- 1320: Microencapsulation of Apis mellifera honey by spray drying with Opuntia ficus indica mucilage as covering material
- 1330: Development of an information system using Project Based Learning in final cycle students Technological University of Peru
- 1340: Sensory and chemical characteristics of atomized cabuya (Agave Americana L.) sweetener
- 1361: Development of an ERP in Portillo Inmobiliaria company using Project Based Learning: experience in Systems Engineering school
- 1369: ANALYSIS OF SATELLITE IMAGE INFORMATION SUPPORTED WITH PYTHON PROGRAMMING: APPLICATION TO GEOREFERENCE IN ENGINEERING
- 1394: Web Platform Implementation at Reich La Perla school: experience at the professional school of Systems Engineering Arequipa Peru
- 1435: Multispectral instrumentation system for the study of tropical tree species
- 1439: Monitoring and management of materials on construction sites using IoT
- 1464: Implementation of the 5'S and PDCA Method in the Logistics area of a plastic distribution company
- 1472: Cryptographic System Using RSA
- 1483: From Geometry to Digital Twin: A Partially-Decoupled 3UPS-3UPRRR Parallel Robot for R-STEM Education
- 1509: Review of the content of trans fatty acids found in different foods
- 1524: Cybersecurity using electronic circuits and Software
- 1526: Use of Strategic Operations Management Tools for the creation of biodegradable bags made from potato peel
- 1534: Functional programming in academia, an imminent need
- 1544: Teacher Candidate Selection Process for Computer Science 1
- 1552: Energy transport problems in biophysics: BBM and Peyrad-Bishop models
- 1586: Menu Engineering and Biometric Technology: Menu Design Factors Affecting Attention and Emotional Processes, an Experimental Analysis in Costa Rica
- 1605: Usability of a Cardiac Diagnosis and Monitoring System for smartwatch based on fractal geometry
- 1612: Judge's verdict or automated formats: Technological intervention in the decision-making of the Justice of the Peace
- 1740: Leadership and Decision Making: A relationship from service SMEs in Manizales (Colombia)
- 1764: Fixed-point Iteration Formulas from Cubic Equations of State, Useful in the Classroom and the Industry.
- 1783: Education for Sustainable Development: Curriculum Approaches and Competence Assessment in a Multidisciplinary Undergraduate Course
- 1788: Guía de evaluación de la calidad-en-uso basada en ISO/IEC 25000 para plataformas B2C de pymes del sector de alimentos
- 1846: Exploring new trends in mobile payment technology: A systematic literature search
- 1863: Are there opportunities for Upstream Sector in Peru? A comprehensive study of Peruvian Peak Oil Production with Hubbert Model
- 1865: Modeling of the kinetics of drying by microwave energy of slices of pineapple (Ananas comosus L.) variety Golden
- 1867: Empowering futures: motivational strategy applied to high-school students for STEM degree choice
- 1876: Implementation of a LoRaWAN Network for Smart Water Consumption Monitoring in Panama
- 1918: The technological gap of undergraduate education in Mexico and its impact on E-Learning
- 1925: Methodological proposal for information management applied to an agricultural company.
- 1926: Wireless data acquisition for assistance with mobile application in the sizing of a photovoltaic system in the province of Chepen
- 1965: How to optimize the electricity supply in vulnerable communities in Costa Rica?
- 1989: Integration of the Internet of Things (IoT) in industry: Strategies for Advanced Process Monitoring and Control
- 1990: ECONOMIC AND ENVIRONMENTAL EVALUATION OF WHEEL-PATH TYPE PAVEMENT FOR USE ON LOW-TRAFFIC RURAL ROADS IN COSTA RICA
- 1992: Mothers Can Be Computing Leaders, Too: Why Mothers Should Lead the Culturally Responsive Computing Education Movement
- 1996: Conservation of Information Assets Based on the Symbolic Language of the Pastos Indigenous People
- 1998: Rationalized framework for multivariate analysis of multiple correspondences of human resources and the competitive advantage of MYPES
- 2008: Professional training of engineering teachers