Propuesta de mejora del diseño de la red de medidores inteligentes en un campus universitario

Published in: Innovation in Education and Inclusion : Proceedings of the 16th LACCEI International Multi-Conference for Engineering, Education and Technology
Date of Conference: July 18-20, 2018
Location of Conference: Lima, Perú
Authors: Jonatan Edward Rojas Polo (Pontificia Universidad Católica del Perú, PE)
Angel Kamt Marconi (Pontificia Universidad Católica del Perú, PE)
Alexia Cáceres Cansaya (Pontificia Universidad Católica del Perú, PE)
Alessandro Oscar Gilardino Arias (Pontificia Universidad Católica del Perú, PE)
Full Paper: #5

Abstract:

This research was developed within the geographical area of the campus of the “Pontificia Universidad Católica del Perú” (PUCP, Lima-PE), and deals with the design and centers once electricity and water distribution networks within the campus buildings and pavilions academic. The data (measurements) were collected on the main servers, taking into account the communication capacity of each device, the available communication channels, and meeting their respective restrictions of range, zone limitation, among others. The objective is to design an optimal route of the data of each point, searching for the minimization of the costs implementation’s. The research began with the identification of the measurement requirement (number of meters of each type) in each of the 54 buildings (pavilions) and the distance (location) of each point within the campus. A description of the available communication devices and technologies is made, with an emphasis on their cost specifications, range ranges and data repeatability. Once the routes, quantities of devices required and restrictions were presented, the optimum route of the data and the quantity and type of communication devices required at each point were determined using the AMPL software. A comparison was made between this result and the non-optimized one, they achieve significant savings with the optimization model.